DESCRIPTION

The Daikin R32 Standard Efficiency Heat Pump Direct-Drive Packaged Rooftop Unit offers a reliable, efficient, and easy-to-install solution for light commercial spaces. Designed for quick replacements or new installations, this unit can seamlessly replace most existing rooftop units without the need for additional adapters, saving both time and money. Built with high-quality, corrosion-resistant galvanized steel, it features easy filter access and a fully insulated cabinet to reduce energy loss. The unit’s low-noise, high-performance compressor and direct-drive fan ensure quiet, efficient operation, while the advanced coils provide excellent dehumidification and cooling. With environmentally friendly R32 refrigerant and minimal maintenance requirements, this rooftop unit delivers long-lasting, hassle-free comfort for any building.

• EER HSVTC: 11.3
• Energy Star Certified: No
• Heating Capacity Nominal: 67 000 Btu/H
• Refrigerant Type: R-32
• SEER2: 16.7
• Total BtuH: 68000 Btu/H
• Unit Height: 43-1/2 in
• Unit Width: 74 in
• Cooling Capacity Nominal: 68 000 Btu/H
• Max Overcurrent Protection: 15 A
• Power Phase: 3 Ph
• Power Voltage: 460 V
• Compressor Stages: Two Stage
• Compressor Type: Scroll
• Energy Source: Electric
• Motor Speed Type: Multi Speed ECM
• Unit Weight: 645 lb
• Tonnage: 6
• Unit Depth: 48-5/16 in
• Heat Exchanger Type: Air Cooled

Installation

• Fast & Easy Installation: Daikin packaged rooftop units are designed for quick installation, making them ideal for both new construction and retrofit projects.
• Direct Replacement: The units are engineered to directly replace most existing rooftop units without the need for a curb adapter, ensuring shorter replacement time and lower installation costs.

Cabinet Construction

• High-Quality Galvanized Steel: Built with durable galvanized steel and a powder-paint finish for increased corrosion resistance.
• Tool-Less Filter Access: Easy filter access with no tools required for quick and simple maintenance.
• Fully Insulated Cabinet: Prevents sweating and thermal losses, using foil face fiberglass insulation that does not release exposed filter fibers into the airstream.
• 1” Raised Flanged Edges: Provides easy installation for duct connections with a raised flanged edge around supply and return ducts.
• Heavy Gauge Galvanized Steel Base Rail: The full perimeter base rail provides structural strength for installation and includes holes for overhead rigging and forklift lifting.
• Flexible Electrical Access: Electrical lines can be routed through the base or horizontal knockout for easier field installation and accessibility.

Compressor

• High-Performance Scroll Compressor: Features low-noise scroll compressors designed to meet the required total load.
• Vibration Isolation: Factory-mounted on rubber grommets to reduce vibrations and noise.
• Safety Features: Includes high and low pressure safety switches for enhanced protection.
• R32 Refrigerant: The unit is factory-charged with environmentally friendly low GWP R32 refrigerant, ensuring energy efficiency and sustainability.
• Single & Two-Stage Compressors: 3-5 ton units feature a single-stage scroll compressor, while 6-ton units use a two-stage scroll compressor for enhanced performance.
• Compressor Placement: Located outside the condenser section to avoid air bypass and improve system efficiency.
• Internal Overload Protection: Protects the compressor from overcurrent conditions.

Supply Fan

• Efficient & Quiet Operation: The direct-drive airfoil single width, single inlet (SWSI) supply fan features aluminum fan blades for efficient and quiet operation across a wide range of static pressures and air flow requirements.
• Direct-Drive EEM Motor: No need for belts, sheaves, or bearings, and the motor is permanently lubricated to reduce maintenance costs.
• Factory-Balanced Fan Assembly: Each fan assembly is dynamically trim balanced at the factory for faster startup and efficient performance.
• Thermal Overload Protection: Motor includes thermal overload protection for long-lasting operation.

Coils

• Large Face Area Outdoor Coils: Constructed with seamless copper tubes and aluminum plate-type fins, these coils ensure high operating efficiency and better heat transfer.
• Improved Dehumidification: The indoor coil section is designed in a draw-through configuration, enhancing dehumidification and air quality.
• Factory Pressure Tested Coils: Coils are pressure tested at the factory to ensure integrity and leak prevention.
• Copper Tube / Aluminum Fin Coils: High-efficiency copper tube/aluminum fin coils are used for both condenser and evaporator sections.

Key Features

• Corrosion-Resistant Construction
• Low Noise Operation for Enhanced Comfort
• Energy Efficient with R32 Refrigerant
• Durable, Long-Lasting Components
• Simplified Maintenance for Lower Total Cost of Ownership

WARRANTY COVERAGE

PRODUCT DOCUMENTS & TECHNICAL SPECIFICATIONS

Daikin Installation Manual

Daikin Specification Sheets 

Daikin Catalog

Daikin Brochure