Goodman 96% AFUE Gas Furnace 100,000 BTU Nine Speed ECM Two Stage Upflow/Horizontal GM9C961004CN

The Goodman 96% AFUE Gas Furnace GM9C961004CN is a highly efficient, 100,000 BTU unit, perfect for powerful and economical heating. Its nine-speed ECM motor ensures optimal airflow and energy savings, while a two-stage gas valve and two-speed blower deliver quiet, consistent comfort. With upflow/horizontal configuration and compact dimensions (33-3/8” H x 21” W x 28” D), it’s easy to install in varied spaces. Durable stainless and aluminized-steel heat exchangers, California Low NOx compliance, and self-diagnostic LED controls ensure reliable, eco-friendly performance.

• Unit Height: 33-3/8 in
• Unit Width: 21 in
• AFUE: 96 %
• Cooling Capacity Nominal: 48000 Btu/H
• Installation Configuration: Upflow/Horizontal
• Max Overcurrent Protection: 25 A
• Power Phase: 1 Ph
• Power Voltage: 115 V
• Motor Speed Type: Nine Speed ECM
• Unit Weight: 140 lb
• Unit Depth: 28 in
• Heat Exchanger Type: Air Cooled

Product Features For Goodman 96% Highly Efficient Gas Furnace

• Energy-Efficient ECM Blower Motor: Multi-speed design ensures efficient, energy-saving airflow.
• Durable Heat Exchangers: Heavy-duty aluminized-steel tubular and stainless-steel secondary heat exchangers for long-lasting performance.
• Quiet Two-Stage Gas Valve: Operates at a low noise level while maximizing economical heating.
• Reliable Silicon Nitride Igniter: Built to withstand wear, enhancing system durability.
• Two-Speed Induced Draft Blower: Provides quiet operation by adjusting airflow as needed.
• Advanced Self-Diagnostic Control Board: Features LED fault code history for streamlined troubleshooting.
• Color-Coded Low-Voltage Terminals: Easy connection setup with provisions for electronic air cleaner and humidifier.
• Low Continuous Fan Speed Options: Quiet air circulation mode for enhanced comfort.
• California Low NOx Compliant: Meets strict 40 ng/J emissions standards, though restricted in SCAQMD as of October 1, 2019.
• AHRI Certified & ETL Listed: Guaranteed performance and safety standards.
• Multi-Position Installation: Flexible installation in upflow, horizontal left, or right configurations.
• Direct & Non-Direct Vent Compatible: Options for 1-pipe or 2-pipe venting for different installations.
• Convenient Gas & Electrical Service Connections: Flexible left or right side installation.
• Low Cabinet Air Leakage: QLeak ≤ 2% ensures a tightly sealed system.
• Heavy-Gauge Steel Cabinet: Built to last with a durable finish.
• Fully Insulated for Efficiency: Heat exchanger and blower section insulated for minimal heat loss.
• Easy-Remove Bottom or Side Air Inlet: Effortless access with tabs for simplified bottom air-inlet applications.

Goodman R32 3.5 Ton Cased Evaporator Coil Horizontal 30"W with Internal TXV CHPTA4230C3

Goodman R32 3.5 Ton Cased Evaporator Coil offers exceptional performance with a 30"W design optimized for horizontal applications. It features a durable all-aluminum construction, specifically designed for efficient R-32 refrigerant use. The coil includes a long-lasting R-32 sensor and factory-installed thermal expansion valves for versatility in cooling and heat pump systems. It has a standardized copper suction tube stub length for simplified installation, a single front access panel for easy maintenance, and foil-faced insulation to minimize condensation. The rust-resistant drain pan ensures longevity and compliance with safety standards, being AHRI certified and ETL listed.

• Refrigerant Type: R-32
• Unit Height: 21 in
• Unit Width: 30 in
• Cased/Uncased: Cased
• Coil Application: Horizontal A
• Unit Depth: 21 in

Product Features For Goodman R32 Horizontal Evaporator Coil

• All-Aluminum Evaporator Coil: Designed for optimal heat exchange and enhanced durability.
• Optimized for R-32 Refrigerant: Includes circuits and manifolds specifically engineered for efficient R-32 refrigerant use.
• Long-Lasting R-32 Sensor: Designed to match the lifespan of the coil, ensuring reliable performance.
• Factory-Installed Thermal Expansion Valves: Suitable for both cooling and heat pump applications, providing versatile usage.
• Standardized Copper Suction Tube Stub Length: Simplifies installation and maintenance processes.
• Check Flowrator: Engineered for efficient operation in both cooling and heat pump applications.
• Horizontal Application Design: Facilitates flexible installation options in various settings.
• 21" Depth: Optimized for easier access in attic installations, enhancing usability.
• Single Front Access Panel: Allows for quick and convenient maintenance and servicing.
• Foil-Faced Insulation: Covers the internal casing to minimize cabinet condensation and improve energy efficiency.
• Galvanized, Leather Grain-Embossed Finish: Provides an attractive appearance and added durability.
• Rust-Resistant Thermoplastic Drain Pan: Features a low water-retention design to prevent corrosion and enhance longevity.
• DecaBDE-Free Thermoplastic Drain Pan: Includes secondary drain connections for improved water management and compliance.
• Drain Pan Rails: Designed for easy removal and repositioning of coils without compromising structural integrity.
• UV-Resistant Drain Pan: Ensures durability and performance even in exposed environments.
• AHRI Certified: Guarantees performance and efficiency standards are met.
• ETL Listed: Ensures compliance with safety standards for peace of mind.

Goodman Furnace Integration Kit for R-32 Refrigerant Systems 0230K00044

The Goodman Furnace Integration Kit for R-32 Refrigerant Systems is designed to facilitate the installation of Goodman gas furnaces in systems using R-32 refrigerant. This kit typically includes components necessary to ensure proper compatibility and functionality between the furnace and the R-32 cooling system.

Key Features:

• Compatibility: Ensures that the furnace and refrigerant system work seamlessly together.
• Enhanced Efficiency: Optimizes performance when using R-32 refrigerant, which has a lower global warming potential compared to traditional refrigerants.
• Installation Components: May include items like sensors, wiring harnesses, and other connectors needed for integration.
• Improved Comfort: Aids in achieving more efficient heating and cooling, enhancing overall comfort in the home.

This integration kit is essential for HVAC professionals when retrofitting or installing systems with R-32 refrigerant, ensuring compliance with safety and performance standards.