Goodman 5 Ton Split Air Conditioner 14.3 SEER2 Single Stage Non-Communicating GLXS4BA6010

The Goodman 5 Ton Split Air Conditioner offers a cooling capacity of 60,000 BTU/h and boasts a 14.3 SEER2 rating for energy efficiency. Designed for easy installation, it comes fully charged for 15 feet of tubing and features a high-efficiency scroll compressor. The unit is built with durable copper tubing and enhanced aluminum fins for superior heat exchange. Safety is ensured with an enclosed contactor, high-pressure switch, and extended-life capacitors. Its aesthetically pleasing design includes a removable grille for maintenance access and a protective steel louver coil guard, all while meeting AHRI certification and ETL listing standards.

• Refrigerant Type: R-32
  
• Unit Height: 39.5 in
• Unit Width: 35.5 in
• Communication Feature Type: Non-Communicating
• Cooling Capacity Nominal: 60,000 Btu/H
• Max Overcurrent Protection: 50 A
• Power Phase: 1 Ph
• Power Voltage: 208/240 V
• Compressor Stages: Single Stage
• Compressor Type: Scroll
• Unit Weight: 76 lb
• Tonnage: 5
• Model Efficiency: 14.3 SEER2
• Unit Depth: 35.5 in

• High-efficiency scroll compressor 
• Fully charged for 15' of tubing
• Copper tube/enhanced aluminum fin coil (5mm)
• Factory-installed filter drier and accessible service valves
• Enclosed contactor, high-pressure switch, and extended-life capacitors
• AHRI certified and ETL listed

Product Features For Goodman R32 AC Condenser GLXS4BA6010

• Energy-Efficient Compressor: Provides optimal cooling performance while reducing energy consumption, leading to lower utility bills.
• Fully Charged for 15' of Tubing Length: Comes pre-charged with refrigerant for quick and straightforward installation.
• Copper Tube/Enhanced Aluminum Fin Coil: Features a 5mm diameter design that enhances heat exchange efficiency and ensures durability.
• Factory-Installed Filter Drier: Protects the system by removing moisture and impurities from the refrigerant, promoting longevity and reliability.
• Sweat Connection Service Valves: Designed for easy access to gauge ports, simplifying maintenance and servicing tasks.
• Enclosed Contactor: Safeguards critical electrical components from damage, ensuring reliable operation.
• High-Pressure Switch: Monitors system pressure and maintains safe operating levels for efficient performance.
• Ground Lug Connection: Provides a secure grounding point, enhancing the safety of the unit.
• Extended Life Capacitors: Built for durability, minimizing the need for frequent replacements and ensuring stable operation.
• AHRI Certified & ETL Listed: Complies with industry standards for performance and safety, guaranteeing quality and reliability.

Cabinet Features

• Removable Grille-Style Top Design: Compliant with UL 60335-2-40, allowing for easy maintenance access and improved airflow.
• Venturi Design: Increases airflow velocity, enhancing cooling efficiency and comfort.
• Attractive Architectural Gray Powder-Paint Finish: Offers a visually appealing look while ensuring protection against harsh weather, with 500-hour salt-spray approval.
• Wire Fan Discharge Grille: Promotes efficient airflow and protects internal components from debris.
• Steel Louver Coil Guard: Provides additional protection for the coil, extending the unit's lifespan and maintaining performance.
• Top and Side Maintenance Access: Offers flexible servicing options for various installation setups, ensuring convenience.
• Single-Panel Access to Controls: Simplifies installation and provides ample space for field-installed accessories.
• Hurricane Integrity Compliance: When properly anchored, meets the 2023 Florida Building Code requirements for hurricane-type winds (anchor bracket kits available).

Goodman 96% AFUE Gas Furnace 120,000 BTU Nine Speed ECM Two Stage Upflow/Horizontal GM9C961205DN

The Goodman 96% AFUE Gas Furnace 120,000 BTU Nine-Speed ECM Two-Stage Upflow/Horizontal GM9C961205DN offers high-efficiency heating with a 96% AFUE rating. Featuring a multi-speed ECM blower motor for optimized airflow and reduced energy use, this furnace ensures consistent comfort. It includes a heavy-duty aluminized-steel heat exchanger and a stainless-steel secondary heat exchanger for improved heat transfer and recovery. The two-stage gas valve provides quiet, economical heating, and the silicon nitride igniter ensures reliable performance. With low continuous fan speed options and provisions for an air cleaner and humidifier, it enhances air quality.

• Unit Height: 33-3/8 in
• Unit Width: 24-1/2 in
• AFUE: 96 %
• 120,000 BTU Heating Capacity
• Installation Configuration: Upflow/Horizontal
• Max Overcurrent Protection: 25 A
• Power Phase: 1 Ph
• Power Voltage: 115 V
• Motor Speed Type: Nine Speed ECM
• Unit Weight: 154 lb
• Unit Depth: 28 in
• Heat Exchanger Type: Air Cooled

Product Features For Goodman Highly Efficient 96% AFUE Gas Furnace

• Energy-Efficient, Multi-Speed ECM Blower Motor for optimized airflow and reduced energy consumption
• Heavy-Duty, Aluminized-Steel Tubular Heat Exchanger for superior durability and heat transfer
• Stainless-Steel Secondary Heat Exchanger enhances heat recovery for improved efficiency
• Two-Stage Gas Valve provides quiet, economical heating with better control
• Durable Silicon Nitride Igniter ensures reliable ignition for consistent performance
• Quiet Two-Speed Induced Draft Blower minimizes operational noise
• Self-Diagnostic Control Board with constant memory fault code history output via LED for easy troubleshooting
• Color-Coded Low-Voltage Terminals with provisions for electronic air cleaner and humidifier installation
• Low Continuous Fan Speed Options for quiet air circulation and consistent comfort
• All models comply with California 40 ng/J Low NOx Emissions Standard for environmentally friendly operation
• SCAQMD Compliance: Cannot be installed in California’s South Coast Air Quality Management District (SCAQMD) on or after October 1, 2019
• AHRI Certified & ETL Listed ensuring top-tier quality and safety standards
• Multi-Position Installation: Upflow, horizontal left or right for versatile setup options
• Certified for Direct Vent (2-Pipe) or Non-Direct Vent (1-Pipe) to fit various installation needs
• Easy-to-Install Top Venting with optional side venting for installation flexibility
• Convenient Left or Right Connection for gas and electrical service
• Cabinet Air Leakage (QLeak) ≤ 2% for improved energy efficiency
• Heavy-Gauge Steel Cabinet with a durable finish for lasting protection
• Fully insulated Heat Exchanger and Blower Section for improved performance and noise reduction
• Airtight Solid Bottom or Side Return with easy-cut tabs for effortless removal in bottom air-inlet applications

Optimize your heating system with energy-efficient technology, low NOx emissions, and versatile installation options for maximum comfort and performance.

Goodman 5-Ton R32 Horizontal Cased Evaporator Coil 24.5"H x 30"W with Internal TXV CHPTA6030D3

The Goodman 5-Ton R32 Horizontal Cased Evaporator Coil (Model CHPTA6030D3) features durable all-aluminum construction for enhanced corrosion resistance and heat exchange efficiency. Designed for R-32 refrigerant, it includes factory-installed thermal expansion valves for precise refrigerant flow control. The compact design facilitates easy attic installation and maintenance, featuring a single front access panel for quick servicing. It also has foil-faced insulation to reduce condensation and a rust-resistant thermoplastic drain pan with secondary connections. AHRI certified and ETL listed, this coil meets industry standards for performance and safety.

• Refrigerant Type: R-32
• Cased/Uncased: Cased
• Coil Application: Horizontal A 
• Model: CHPTA6030D3
• Cabinet Dimensions: 30" W x 21" D x 24½" H
• Nominal Tons: 4 - 5
• Connection: ⅜" and ⅞"
• Ship Weight: 82 lbs

Product Features For Goodman R32 Horizontal Evaporator Coil

• All-Aluminum Construction: Durable design enhances corrosion resistance and improves heat exchange efficiency.
• Optimized for R-32 Refrigerant: Specifically designed circuits and manifolds ensure compatibility and efficiency with R-32 refrigerant.
• R-32 Sensor: Engineered for the lifespan of the coil, providing reliable monitoring and performance.
• Factory-Installed Thermal Expansion Valves: Integrated for cooling and heat pump applications, ensuring precise refrigerant flow control.
• Standardized Copper Suction Tube Stub Length: Simplifies installation and maintenance for technicians.
• Check Flowrator: Designed for cooling and heat pump applications to maintain optimal performance.
• Horizontal Application Design: Tailored for horizontal installations, offering flexibility in various setups.
• 21" Depth: Compact size facilitates easier access in attic spaces for installation and maintenance.
• Single Front Access Panel: Allows convenient access to internal components for quick servicing.
• Foil-Faced Insulation: Covers the internal casing to effectively reduce cabinet condensation, enhancing system efficiency.
• Galvanized, Leather Grain-Embossed Finish: Offers durability and a visually appealing aesthetic.
• Rust-Resistant, Thermoplastic Drain Pan: Features a low water-retention design, reducing maintenance needs.
• DecaBDE-Free Thermoplastic Drain Pan: Safe for the environment with secondary drain connections for added functionality.
• Drain Pan Rails: Designed for easy removal and repositioning of coils without compromising structural integrity.
• UV-Resistant Drain Pan: Protects against degradation from sunlight exposure, ensuring long-lasting performance.
• AHRI Certified: Confirms compliance with industry standards for efficiency and performance.
• ETL Listed: Ensures the product meets rigorous safety standards.